Main Article Content
The proposed work, a filtenna for s band application is implemented. It is designed by embedding an Interdigital band pass filter (IDBPF) and leaf shaped antenna which are operated in S band. The IDFBPF is having seven resonators with one end shorted through dual vias. It offers a bandwidth of 1.3GHz from 1.65GHz to 2.95GHz. A Dumbbell shaped DGS (Defected Ground Structure) provided in ground to improve the filter characteristics. Measured pass (BRL) band return loss (S11) & insertion loss (S12) are -18dB & -4.6dB correspondingly. Further, leaf shaped antenna is designed based on modified polar transformation equation; it has 2.7 GHz bandwidth from 1.3 GH to 3 GHz and has a gain of -5.45dBi, and return loss (S11) of -19.5 dB. The filtenna is obtained by integrating the IDBBPF in the fodder line of the leaf designed antenna. The final model has 1.2 GHz operating bandwidth from 02.30 GHz to 03.50 GHz with peak arrival damages at 2.4GHz and 3.1GHz with -20dB and-24dB respectively. The designed filtenna has a pass band gain of -5.3dBi. The shift in operating band is due to combining the filter with antenna. The proposed model is invented on FR4 substrate having a wideness of 01.60 mm and having a dimension of 0.25 0.58 ?02. In this final model two complementary slip ring resonators (CSRR) are used in addition with four dumbbell structures as defects in the ground plane to avoid ripples in return loss (S11) graph. A high degree of concordance exists between empirically measured and simulated outcomes. The radiation band is showing its application in S band wireless mobile communications, Wi-Fi and ISM 2.4GHz band.